Edge · Edgyn

Models that fit the device, the battery and the enclosure

Edgyn specializes the Turbokern loop for Jetson, IGX and DRIVE. It optimizes for latency, power and thermal limits together and benchmarks on the real device, so the artifact meets the on-device budget.

Edge resultExample
Device
Jetson Orin NX 16 GB
Model
Detection, 1080p
Latency
18.4 ms per frame
Power
11.2 W
Precision
INT8, 2 layers FP16
Example. Values are illustrative.

Capabilities

What Edgyn does

01

Embedded profiling

Profiles on Jetson Orin, IGX and DRIVE, where the same model behaves differently.

02

Multi-objective search

Latency, power and temperature optimized together.

03

Edge quantization

INT8 and INT4 tuned for edge tensor cores, with Quantra.

04

On-device benchmark

Every config measured on the physical module, not a cloud proxy.

05

Streaming pipelines

DeepStream and Holoscan graph tuning for sensor workloads.

Planned

06

Fleet rollout

Deploy optimized models across device fleets.

Planned

The envelope

Speed is one of three limits

On a device, a faster model that overheats or drains the battery is not faster. Edgyn optimizes latency, power and temperature together.

Latency
18.4ms measured

Budget 30 ms per frame at 30 fps camera input.

Power
11.2W measured

Budget 15 W module power mode.

Temperature
71°C measured

Budget below throttle point in a sealed enclosure.

Example: a detection model on Jetson Orin NX. Blue is measured, the orange mark is the budget. Values are illustrative.

How it works

Inside a Edgyn run

  1. 01Minutes

    Set the envelope

    Latency, power mode and thermal limit for the device.

  2. 02Minutes

    Profile on device

    Trace the model on the module itself.

  3. 03Hours

    Search

    Precision, kernels and engine flags under all three limits.

  4. 04Minutes

    Ship

    A TensorRT engine and a power-mode recipe.

Specification

Inputs, outputs and hardware

ItemDetailStatus
DevicesJetson Orin Nano, NX, AGXPilot
AutomotiveDRIVE platformsPlanned
Medical and industrialIGX with HoloscanPlanned
ObjectivesLatency, power, temperaturePilot
PipelinesDeepStream, Holoscan graph tuningResearch
Fleet deploymentFleet Command rolloutResearch

FAQ

Questions engineers ask

Do you need our devices?

For the pilot we benchmark on our own Jetson modules. For custom carrier boards or enclosures, we run on yours.

Is Edgyn suitable for safety-certified systems?

Edgyn produces measurements and artifacts that can support your validation work. It does not certify anything, and certification scope for automotive and medical targets is still open.

Which power modes are supported?

Any nvpmodel power mode the module supports. You set the mode as part of the envelope.

Can it tune a whole camera pipeline?

Model optimization is in the pilot. DeepStream and Holoscan pipeline tuning is a research track.

Next step

Fit one model on one device

Bring a perception model and its device budget to the pilot. Edgyn returns an engine and on-device measurements.